Determination of ureter stent appearance on dual-energy computed tomography scan - Abstract

OBJECTIVE: To examine the dual-energy computed tomography (DECT) properties of 7 commonly used ureteral stents to optimize stent selection for calculi monitored using DECT.

The use of DECT to evaluate renal and ureteral calculi has recently increased.

METHODS: Seven stents were individually placed in a fish bowl phantom and imaged using a Siemens Somatom Definition Flash CT scanner. DECT peak tube potentials of 80 and 140 kVp and 100 and 140 kVp were used, reflecting our current dual-energy protocols. These were compared to 31 in vivo stents of known composition. The data were reconstructed on a multimodality WorkPlace (Siemens) using CT syngo Post-Processing Suite software.

RESULTS: The average patient age was 64 years (range 27-90). The average body mass index was 31.9 kg/m2 (range 24-51.6). Of the 27 patients, 4 had uric acid stones and 22 had calcium-based stones; 1 patient had undergone renal transplantation. No difference was seen in the dual-energy characterization of stents from the same manufacturer. All imaged Cook and Bard stents had a dual-energy characterization that approached that of calcium stones (blue). All Boston Scientific and Gyrus ACMI stents had a dual-energy characterization resembling that of uric acid stones (red).

CONCLUSION: The present study evaluated the stent appearance on DECT for various stent manufacturers. This information will aid in the optimal stent selection for patients undergoing treatment of renal calculi and followed up with DECT.

Written by:
Jepperson MA, Thiel DD, Cernigliaro JG, Broderick GA, Parker AS, Haley WE.   Are you the author?
Department of Radiology, Mayo Clinic, Jacksonville, FL.

Reference: Urology. 2012 Nov;80(5):986-9.
doi: 10.1016/j.urology.2012.07.005

PubMed Abstract
PMID: 22921702 Endourology Section






email news signup